Allied International first introduced Eurofarad and Firadec capacitors to North America in 2001 with our first joint sales call to GE with a Eurofarad engineer on September 10, 2001. Today Allied International is the most experienced and only exclusively Exxelia franchised Distributor in North America. Exxelia is a global manufacturer of passive components including capacitors, filters, position sensors, slip rings and wound magnetics for specific demanding industrial applications. Aviation, defense, space, medical, railway, oil & gas and telecommunications industries rely on Exxelia filters, capacitors and wound magnetic components for energy storage, power electronics, power generation and signal filtering. Grouped under the Exxelia brand are Eurofarad film and ceramic capacitors, Firadec Tantalum capacitors, SIC SAFCO aluminum electrolytic capacitors, Dearborn Electronics film capacitors , Temex microwave ceramic capacitors, RAF Tabtronics transformers and inductors and Microspire magnetics.
WET TANTALUM CAPACITORS
Allied International introduced Exxelia’s Firadec brand as a technically and commercially competitive source of wet tantalum capacitors for applications in the oil exploration industry notable for the most extreme temperature, vibration and shock environmental conditions encountered by embedded electronics. Exxelia Wet Tantalum capacitors ST78 and CT78 are now qualified for down hole and other critical applications up to 200° C and Exxelia are working on the 220 and 240 degree capacitors that will be needed for the deeper wells. Pictured is an SMD wet tantalum cap with Kapton sleeve.
MIL SPEC WET TANTALUM NEW
MIL 39006/22 and MIL 39006/25 respectively equivalent to CLR79 and CLR81 types feature hermetically sealed cylindrical tantalum cases and axial leads. Both ranges are available in all cases: T1, T2 T3 and T4 with extended capacitance and voltage ratings.
MIL39006/22 is qualified for voltages from 6V to 125V and provides from 1200µF @ 6V to 56 µF @ 125V. MIL 39006/25 is qualified for voltages from 25V to 125V and provides from 680µF @ 25V to 82 µF @ 125V. Both ranges combine high energy density with large temperature ranges -55°C up to 125°C and are available with H vibration and shock levels.
The EXXELIA (Firadec) CTC21 surface mount solid tantalum has no equivalent from other manufacturers. It offers very low parasitic characteristics (i.e. low ESR and ESL) so that the capacitor can work at high frequencies without over heating because of too many losses. The catalogue product is very reliable. Higher levels of reliability are nevertheless available (up to space level, in accordance to European Space Agency recommendations).- The tantalum dielectric technology is the one which offers the highest values of capacitance in a given volume.
CTC21 Weight: approx. 2,8g Dimensions: D case: 11X12,5X5,5 mm From 6,3V to 100V (63V in ESCC spec.) From 5,6 to 680µF EPPL European Space Agency approved product
EXXELIA (formerly Eurofarad) MLCC Precious metal electrode capacitors offer special feature for demanding applications:
- Very low temperature (-196°C, -269°C).
- Complex functions (RC, RLC)
- Specific shapes on request.
- Gold and Polymer terminations.
- Very high temperature (> 200°C) Ceramic encapsulated Families design,
- Light weight,
- Voltage: 50 V to 100 V ,
- Current up to 50 A,
- Temperature range 55°C +125°C
- PME ceramic capacitors have significantly longer lifetime than Base Metal Electrode ceramic capacitors
European Space Agency (ESA) qualified parts are available.
Available in stock: TCK282 S 0.022 UF +/- 10% 3000 V
EXXELIA FILM CAPS MIL SPEC
Exxelia’s US plant formerly Dearborn Electronics manufactures a range of military specification plastic film capacitors in the United States, including replacements for obsolete polycarbonate film caps. Custom designed capacitors have been designed using dielectrics such as Polyester, Paper, Polystyrene, Polycarbonate, Polysulfone, Polyvinydene Fluoride (PVDF), Polyethylene Naphtalate (PEN), and Fluorene Polyester (FPE). FPE has an operating temperature of up to 300°C and is one of the films that is part of the continuous research of very high temperature films Exxelia USA, formerly Dearborn Electronics, participates in.
EXXELIA FILM CAPACITORS
Exxelia’s Film Caps were formerly sold under the Eurofarad brand name. Plastic film dielectrics include :
Polyphylene Sulfide PPS
polypropylene/paper and polyester dielectrics impregnated in oil or wax.
Large range of capacitance 10 nF to 1000 µF,
- High electrical and mechanical performance,
- High reliability,
- Self healing,
- Non polarized,
- Custom design,
- Light weight,
- Voltage: 50 V to 10000 V ,
- Current up to 50 A,
- Temperature range 55°C +125°C
- Space qualified parts
Although volumetrically larger than equivalent value ceramic capacitors, Exxelia plastic film particularly the PET such as the PM series are winning converts to replace equivalent ceramics due to the lightwieight and reliability owing to self healing property which reduces the necessary safety factor. Commonly used in HF SMPS (High Frequency switch mode power supplies)
ALUMINUM ELECTROLYTIC CAPACITORS
EXXELIA aluminum electrolytic capcitors were sold for many years under the SIC SAFCO brand name.
- High Energy storage, second only to tantalum,
- low ESR ,
- long life, 8000 hours on snap-in parts exceeds competitors
- screw terminal, snap-in terminal,
- low profile, radial, and axial,
- many different case sizes,
- Operating temperatures -55 C to +145C,
- voltage to 630 volts.
- SIC SAFCO make their own electrolyte
- work in altitude up to 28,000 meters (92,000 ft.)
- 20g products are available
Exxelia Magnetics Microspire, RAF Tabtronics and DeYoung
Exxelia Magnetics was formed through the merging of Exxelia Microspire and Exxelia N’Ergy, in 2016. Exxelia Magnetics brings together all French based activities of design and manufacture of high-end electromagnetic components: transformers and inductors, electro-magnets, rotors and stators.
Exxelia Microspire specializes in the design, marketing and production in small quantities of high precision inductors and transformers for high-performance applications in high grade electronics. With more than 25 years experience, Exxelia Microspire is a leader in wound magnetics .
Microspire know how includes linear and toroidal winding standard technologies as well as specific technologies developed for demanding markets.
Main advantages of the designs are :
• Qualified technologies (shock, vibration, burn in tests),
• Experience with customers requiring high precision in harsh environment
• Obsolescence management of materials and toolings,
• No Non Recurrent Cost for custom product in the qualified design.
Microspire has defined gluing, marking, varnishing processes that allow the products to go through more than 5 cleaning cycles and operating up to 180°C. Processes compliant to ESA and NASA outgassing standards have also been defined for products specified up to 140°C.
Download a Microspire catalog
Video overview of Exxelia Magnetics
RAF Tabtronics is a leader in the design and manufacture of custom electromagnetic transformers, inductors, coils and power conversion assemblies. The factory is located in Piffard NY.
Exxelia DeYoung Inc. has manufactured custom electro-magnetic components since 1972. Today the company is one of the few remaining resources for high mix, high reliability products handmade in the U.S., available in quantities from one to thousands per year and backed by experienced in-house design engineering support. Low to mid volume, high complexity products manufactured in Kirkland, WA Higher volume / lower cost production capacity available through Exxelia Vietnam
EXXELIA TECHNOLOGIES FILTERS
EXXELIA TECHNOLOGIES designs and manufactures EMI-RFI filters in different low pass configurations (C, L, Pi, T, 2 x Pi, 2 x L and 2 x T) intended to protect electronic equipment from interferences. Capacitors are a key components in a filter and thanks to its expertise in the field, EXXELIA TECHNOLOGIES is able to manufacture high-end solutions combining performance and reliability.
EXXELIA TEMEX MICROWAVE
Buy RF and Microwave High-Q Capacitors, Tuning Elements, Dielectric Resonators and Ferrites from Allied International, franchised Exxelia Temex distributor. Compare our price and delivery against comparable capacitors from ATC and PP.
Operating frequencies in wireless communications have shifted towards high frequency band, and thus frequencies higher than 1 GHz are now commonly utilized. In addition, the microwave frequency spectrum becoming severely crowded and sub-divided into many different frequency bands, designers are systematically looking for resonators giving them a narrow bandwidth with smaller size. But selecting the right dielectric material for a given microwave application is a difficult challenge.
EXXELIA TEMEX, being one of only a few manufacturers producing its own raw materials, is definitely the right partner to support designers at the early stage of development.